The locksmith store!

Remote control for garage doors and access barriers..
M-SP1B capable of automatically and wirelessly duplicating the frequency and code.

- Duplicate 95% of fixed codes onto any of the buttons.
- Wireless code and frequency capture with no need for adjustments. Each button uses different frequencies.
- Operating frequency: 433-868 Mhz.

INSTANT DUPLICATION
Duplicate in two simple steps.
1. Remote control preparation.
2. Transmission of information from the original remote control.

4 REMOTE CONTROLS IN 1
Duplicate four remote controls on a single remote control

COPYNG PROCEDURE

1. PRESS BUTTON 1 AND 2 OF THE COPY REMOTE CONTROL SIMULTANEOUSLY UNTIL THE RED LED FLASHES.

2. RELEASE BOTH BUTTONS AND WAIT FOR RED LED TO TURN OFF.

3. PRESS THE BUTTON OF THE COPY REMOTE ONTO WHICH YOU WANT TO COPY THE ORIGINAL REMOTE CONTROL(FOR INSTANCE NUMBER 1).
ONLY THE BUTTON SELECTED OF THE COPY REMOTE WILL BE PROGRAMMED.

4. AFTER YOU PRESS THE SELECTED BUTTON THE RED LED WILL STAY ON.

5. PLACE THE ORIGINAL REMOTE CONTROL AT THE RIGHT SIDE OF THE COPY REMOTE AT A DISTANCE OF AROUND 5MM.(EXCEPT FOR HORMAN REMOTES WHERE THE ORIGINAL REMOTE MUST TOUCH THE COPY ONE). BOTH REMOTES MUST ME ON A SMOOTH NON METALLIC SURFACE.

6. PRESS THE BUTTON OF THE ORIGINAL REMOTE CONTROL WHICH YOU WISH TO COPY.

7. THE GREEN LED WILL SWITCH ON WHEN THE CODE IS RECEIVED AND SWITCH OFF ONCE THE CODE IS VERIFIED AND COPIED.

WARNINGS
WHEN GREEN LED STARTS FLASHING INSTEAD OF SWITCHING OFF, IT MEANS THAT A CODE HAS BEEN CACHED, BUT IT WAS NOT ABLE TO VERIFY IT. THIS INDICATION IS COMMON AND MUST NOT BE TAKEN ITO ACCOUNT IF THE ORIGINAL REMOTE IS A 'MASTERCODE', 'MULTIFREQUENCY' OR 'LIFTMASTER FIXED CODE'. IN ANY OTHER CASE, IT IS RECOMMENDED TO DO THE COPYING PROCESS AGAIN, MODIFYING THE DISTANCE BETWEEN THE ORIGINAL AND THE COPY REMOTE, MAKING IT SHORTER OR LARGER OR SOMETIMES CHANGING THE BATTERY OF THE ORIGINAL AND THE COPY REMOTE.
ANYWAY, EVEN IF WARNING INDICATION APPEARS THE COPY IS MADE AND IT IS POSSIBLE, THAT THE REMOTE COULD WORK.
WHEN RED LED STARTS FLASHING IT MEANS THAT THE CODE WAS NOT COPIED. THIS IS CAUSED BECAUSE THE ORIGINAL REMOTE WAS NOT CORRECTLY READ. IT IS RECOMMENDED TO DO THE COPYING PROCESS AGAIN, MODIFYING THE DISTANCE BETWEEN THE ORIGINAL AND THE COPY REMOTE, MAKING IT SHORTER OR LARGER OR SOMETIMES CHANGING THE BATTERY OF THE ORIGINAL AND THE COPY REMOTE.

• EXTACTOR1
• 
• 
  цена:X.XX€
  Qty:
• EXTACTOR2
• 
• 
  цена:X.XX€
  Qty:
• EXTACTOR3
• 
• 
  цена:X.XX€
  Qty:
• EXTACTOR4
• 
• 
  цена:X.XX€
  Qty:

    With cash on delivery service (collect on delivery) you don't need a credit card to make a payment. You can order from our online store and pay direct to courier. Now service is available only for Romania and Greece.